Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Products/Slurry Pump Liners
PRODUCTS · SLURRY PUMP LINERS

Slurry Pump LinersFront liner, frame plate liner and volute liner: the replaceable inner lining

The double-casing design separates pressure containment from wear: the outer casing carries pressure and connects the pipework, while the volute liner, front liner and frame plate liner form the flow path. When they wear, only the lining is replaced.

Each liner has its own job. The front liner controls inlet recirculation, the frame plate liner forms the sealing chamber on the drive side, and the volute liner converts velocity into pressure. Wear in any of them shows first as lost flow and head.

Slurry pump volute liner and liners
Slurry Pump Liners
SCOPE

What this category covers

Part / structureDescription
Front linerBetween cover plate and impeller eye, forms the inlet sealing face
Frame plate linerBehind the impeller on the drive side, forms the sealing chamber
Volute linerLines the casing to form the volute passage
Cover plate linerCompletes the pump chamber and matches the volute liner
MATERIALS

Typical materials for each part

PartFunction in the pumpTypical material
Front LinerThe front liner (throatbush) protects the suction-side cover, forms the impeller inlet sealing face and controls inlet recirculation and suction-side wear.High-chrome wear alloy or rubber; metal parts are preferred for fine but highly abrasive solids.
Frame Plate LinerThe frame plate liner protects the drive-side casing from erosion and forms the sealing chamber with the impeller rear shroud, directly affecting volumetric efficiency.High-chrome wear alloy, rubber lining or wear/corrosion-resistant alloy, matched to the impeller material.
Volute LinerThe volute liner collects slurry discharged by the impeller and converts velocity energy into pressure. It is the key replaceable wear liner in a double-casing pump.High-chrome wear alloy, wear-resistant rubber or polyurethane: metal for coarse abrasive solids, rubber for corrosive fine particles.
Front SheathThe front sheath protects the suction-side flow area and works with the impeller eye and front liner to reduce local erosion.High-chrome wear alloy or wear-resistant rubber according to abrasion severity.
Rear SheathThe rear sheath protects the transition between the drive-side chamber and the seal area, reducing vortex erosion and leakage risk.Wear-resistant alloy or rubber lining, consistent with adjacent liners.
SELECTION

Matching structure and material to the duty

Common combinations; grade choice needs medium temperature, concentration and particle size.

Duty conditionRecommendation
Coarse, highly abrasiveHigh-chrome liners with generous wall thickness
Fine, corrosiveRubber or polyurethane lining, lighter and resistant to corrosion
Short maintenance windowsSplit or lightweight liners to cut downtime
High flow, high concentrationWider passages and lower velocity at the cutwater
MATCHING RANGE

Matching series and models

Model pages list construction, code explanation and chart extracts.

AH series
ZJ series
ZGB series
SP series
HH series
G series
DT series
RELATED PARTS

Parts in this category

Each part has its own page with basic number, material and matching range.

FAILURE MODES

How these parts fail and what to do

Judge by wall thickness, clearance and performance, not by months in service.

FAQ

Slurry Pump Liners questions

What is the difference between a liner and a casing?

Liners are the replaceable wear parts inside the pump; the casing is the pressure-retaining shell. In a double-casing pump the slurry touches the liners, not the casing.

Can only the front liner be replaced?

Yes, but the clearance must be re-set. If the other liners are grooved, performance will not return to the original level.

Can rubber liners handle coarse solids?

No. Sharp coarse particles cut and tear the rubber, so high-chrome liners are used.

Inquiry

Send a model or worn-part dimensions

Parts are supplied by basic part number because the same name has different numbers in different frames. Send the pump model, frame code and a photo of the worn part, or the basic number directly.

Ask about Slurry Pump Liners

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry