Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Slurry pumps/High Head Slurry Pump (HH Series)
SLURRY PUMP SERIES

High Head Slurry Pump (HH Series)High head per stage · stageable

The HH series thickens the wear sections and strengthens the frame of the heavy duty pump to reach higher head in a single stage. The charts on file for 1.5/1C-HH and 3/2D-HH cover 25-92 m per stage, for low-density high-head duty or dense but only mildly abrasive slurry.

Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

HH series high head slurry pump
HH Series High Head Slurry Pump
CONSTRUCTION

How this series is built

Horizontal, double-casing, high-head heavy duty slurry pump. The HH series builds on the heavy duty slurry pump with thicker wear sections and heavier frames for higher single-stage head. It suits low-concentration/high-head or high-concentration/low-abrasion high-head duties, long-distance lines and series operation.

MODELS & DESIGNATION

Reading the designation, models on file

For example 3/2D-HH: 3 is the suction bore (inch), 2 the discharge bore (inch), D the frame code and HH the high-head series.

PERFORMANCE

Flow, head and speed coverage

Typical coverage: discharge bores about 25-150 mm and single-stage head up to roughly 90-118 m.

ModelMax. power kWQ m³/hH mn r/minMax. eff. %
1.5/1B-AH1512.6-28.86-681200-380040
2/1.5B-AH1532.4-726-581200-320045
3/2C-AH3039.6-86.412-641300-270055
4/3C-AH3086.4-1989-521000-220071
4/3D-AH6086.4-1989-521000-220071
6/4D-AH60162-36012-56800-155065
6/4E-AH120162-36012-56800-155065
8/6E-AH120360-82810-61500-114072
8/6R-AH300360-82810-61500-114072
10/8ST-AH560612-136811-61400-85071
12/10ST-AH560936-19807-68300-80082
14/12ST-AH5601260-277213-63300-60077
Rows are excerpted from the AH Series Pump Performance Chart chart on file. Read the full table online; selection follows the supplied documents and written confirmation.
APPLICATIONS

Typical duties

The industry pages behind these duties set out recommended series, wear parts and field checks.

MATERIALS & SEALING

Wetted materials and shaft sealing

Material follows the medium; sealing follows suction pressure and whether dilution is allowed.

SELECTION NOTES

Three checks before choosing this series

WEAR PARTS

Wear parts and basic part numbers

Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

FROM THE MANUAL

Requirements stated in the manual

Excerpts that apply to this series; read the full text on the online reading page.

FAQ

High Head Slurry Pump (HH Series): common questions

How does HH differ from AH?

Both are heavy duty double-casing pumps. HH has thicker wear sections, a heavier frame and more head per stage; AH covers a wider range of bores and flows. Compare single-stage head first, then bore size.

How many HH stages can be stacked?

The limit comes from allowable working pressure and seal water conditions, not a fixed number. From the second stage onward, casing, cover and seal must be reviewed for the pressure actually seen.

Can high head be reached with a small bore at high speed instead?

It can hit the duty on paper but rarely pays. Higher speed accelerates wear, raises cavitation risk and shortens life in solids-laden service by more than the purchase saving.

NEXT STEP

Send the duty and we confirm model and material

Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.

Request a quotation

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry