Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Slurry pumps/Vertical Sump Slurry Pump (SP / SPR)
SLURRY PUMP SERIES

Vertical Sump Slurry Pump (SP / SPR)Vertical submerged · self-priming · rubber option

The SP puts the wet end below the liquid surface, so no priming is needed at start-up; it suits pits, sumps, settling tanks and pond cleaning. The SPR build has rubber-lined wetted parts for fine particles and mild corrosion. Models run from 40PV-SP to 300TV-SP.

Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

SP series vertical sump slurry pump
SP / SPR Vertical Sump Pump
CONSTRUCTION

How this series is built

Vertical, submerged, overhung centrifugal slurry pump. SP / SPR sump pumps keep the motor above the liquid while the pump end is immersed in a pit or tank. No foot valve, priming, shaft seal or seal water is required, suiting fixed submerged duties in settling ponds, sumps and flotation cells.

MODELS & DESIGNATION

Reading the designation, models on file

For example 100RV-SP: 100 is the discharge bore (mm), RV the vertical frame code and SP the sump pump series; SPR denotes the rubber-lined version.

PERFORMANCE

Flow, head and speed coverage

Typical coverage: discharge bores about 40-300 mm and head up to about 40 m.

ModelMax. power kWQ m³/hH mn r/minMax. eff. %
40PV-SP1519.44-43.24.5-28.51000-220040
40PV-SPR1517.28-39.64-261000-220040
60QV-SP3023.4-1115-29.5700-150050
60QV-SPR3022.5-1055.5-30.5700-150051
100RV-SP7554-2895-35500-120056
100RV-SPR7564.8-2857.5-36600-120062
150SV-SP110108-479.68.5-40500-100052
200SV-SP110189-8916.5-37400-85064
250TV-SP200261-10897.5-33.5400-75060
300TV-SP200288-12676.5-33350-70050
Rows are excerpted from the SP Series Vertical Pump Chart chart on file. Read the full table online; selection follows the supplied documents and written confirmation.
APPLICATIONS

Typical duties

The industry pages behind these duties set out recommended series, wear parts and field checks.

MATERIALS & SEALING

Wetted materials and shaft sealing

Material follows the medium; sealing follows suction pressure and whether dilution is allowed.

SELECTION NOTES

Three checks before choosing this series

WEAR PARTS

Wear parts and basic part numbers

Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

FROM THE MANUAL

Requirements stated in the manual

Excerpts that apply to this series; read the full text on the online reading page.

FAQ

Vertical Sump Slurry Pump (SP / SPR): common questions

SP and ZJL are both vertical; how do they differ?

Both are vertical submerged designs. SP covers a wider size range and offers the rubber-lined SPR; ZJL is a vertical single-stage sump pump with its own charts. Choose on pit depth, flow and abrasiveness.

Can a sump pump run dry?

No. The column must stay submerged; dry running destroys bearings and seals, and rubber linings fail quickly from dry friction.

What if the sump has thick settled solids?

Fit an agitator or jet nozzle at the wet end to bring solids into suspension before pumping. Plunging straight into the bed blocks passages and induces vibration.

NEXT STEP

Send the duty and we confirm model and material

Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.

Request a quotation

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry