Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Slurry pumps/Light Duty Slurry Pump (L Series)
SLURRY PUMP SERIES

Light Duty Slurry Pump (L Series)Fine solids · low density · compact

The L series trades size and weight for higher running speed to handle fine, low-density or mildly corrosive slurry. Models run from 20A-L to 300S-L, suited to tight installation space and mildly abrasive media; it is not a substitute for a heavy duty pump on coarse solids.

Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

L series light duty slurry pump
L Series Light Duty Slurry Pump
CONSTRUCTION

How this series is built

Horizontal, single-stage single-suction light duty slurry pump. The L series keeps the design principles of heavy duty pumps but uses a higher-efficiency impeller. It runs faster and is smaller and lighter, suiting fine-particle, low-concentration or corrosive slurry and medium-low head, high-flow duties.

MODELS & DESIGNATION

Reading the designation, models on file

For example 150E-L: 150 is the suction/discharge bore (mm), E the frame code and L the light duty series.

PERFORMANCE

Flow, head and speed coverage

Typical coverage: bores about 25-750 mm, flow up to about 13860 m3/h and head up to about 60 m.

No public chart is on file; pricing and outline dimensions are available per model.
APPLICATIONS

Typical duties

The industry pages behind these duties set out recommended series, wear parts and field checks.

MATERIALS & SEALING

Wetted materials and shaft sealing

Material follows the medium; sealing follows suction pressure and whether dilution is allowed.

SELECTION NOTES

Three checks before choosing this series

WEAR PARTS

Wear parts and basic part numbers

Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

FROM THE MANUAL

Requirements stated in the manual

Excerpts that apply to this series; read the full text on the online reading page.

FAQ

Light Duty Slurry Pump (L Series): common questions

Can the L series replace a heavy duty pump?

No. Thin wear sections and high speed lead to rapid failure on coarse abrasive duty. Use AH, ZJ or G instead.

How should 20A-L be read?

20 is the discharge bore in mm, A the impeller or build code and L the light duty series. The model page carries the full breakdown and performance.

Can a light duty pump handle corrosive slurry?

Yes, with the material confirmed separately. Mild acid or alkali allows corrosion-resistant metal or a rubber-lined build; strong acids and high chloride need selection against the assay.

NEXT STEP

Send the duty and we confirm model and material

Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.

Request a quotation

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry