Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/About us
ABOUT US

About Zhongqian PumpSlurry pumps and wetted parts, identified part by part

Shijiazhuang Zhongqian Pump Industry Co., Ltd. supplies slurry pumps, slurry pump spare parts and wetted components from Shijiazhuang, Hebei, China.

Our range covers 13 pump series and 69 catalogued models, plus 27 spare parts including impellers, liners, casings, shaft sleeves, bearing assemblies and seals. Every item is identified by pump model and basic part number, not by appearance.

AH series slurry pump
AH series heavy duty slurry pump
WHO WE ARE

A technical supplier, not a catalogue of everything

We work on one product family: slurry pumps and their wear parts.

Most slurry pump failures are not caused by a bad pump. They come from a duty that does not match the selection, a wetted material that does not match the particles, or a spare part that "looks the same" but is not the right item. Our work is built around removing those three failure modes.

We supply horizontal heavy-duty pumps (AH, HH, ZGB), vertical and sump pumps (SP, ZJL, ZJQ), and special-duty units (G gravel pumps, DT FGD pumps, AF froth pumps, SHG shield slurry pumps). Spare parts follow the double-casing structure: impeller, front liner, frame plate liner, volute liner, casing, cover plate, shaft, shaft sleeve, stuffing box, mechanical seal and bearing assembly.

Every model page on this site lists the construction, the model code explanation and an extract of the published performance chart. Every part page lists the basic part number, material options, matching pump range and wear symptoms. Documents are readable online without a download form.

13pump series: horizontal, vertical, special duty
69catalogued models with data and construction
27spare parts identified by basic number
12charts and manuals readable online
WHAT WE SUPPLY

Four business lines

HOW WE WORK

How we identify the right part

Four checks before a price is quoted.

01

Pump model and frame: the letter in 6/4D-AH defines the frame size, which changes the shaft and bearing assembly.

02

Basic part number: the same part name has different numbers in different frames. Impeller 147, frame plate liner 041, shaft sleeve 075.

03

Material route: high-chrome alloy for coarse abrasive solids, rubber for fine corrosive slurry. These are not interchangeable.

04

Interfaces and clearance: the impeller-to-liner clearance and the sealing face design decide whether the pump returns to its original performance.

What helps us most: a nameplate photo, a photo of the worn part, key dimensions (impeller OD, inlet diameter, sleeve bore) and the duty data. With complete information we normally confirm the part number and price within one business day.
QUALITY

How supply is controlled

Model, material and dimensions are checked before shipment.

Wear part quality often shows up only after assembly: soft material wears through early, a wrong dimension opens the clearance and cuts efficiency, a rough sealing face leaks. Our supply process therefore follows a fixed order.

  • Model and part number Checked against the nameplate model, frame code and basic part number before quotation.
  • Material confirmation Alloy grade and hardness range for metal parts; compound and hardness for rubber parts.
  • Dimension check Inlet diameter, outside diameter, sealing faces and bolt pattern are verified item by item.
  • Visual and assembly check Casting defects, machined faces and fits are inspected; complete pumps are assembled and barred over before dispatch.
  • Packing and marking Each item is marked with its part number and packed separately to protect sealing faces in transit.
Plant area, equipment list, monthly capacity and management-system certificates are published only when confirmed by the company. This site does not list unverified figures or certifications.
APPROACH

Clear engineering beats a lower price

Slurry pumps are selected on duty, not on a catalogue page. The same pump can last months or years depending on particle size, solids concentration and pH. We therefore ask about the duty before quoting: what the medium is, how large the particles are, how high the concentration is, how long the pipeline is, and whether the slurry is corrosive.

For overseas buyers we provide the same technical documents in English, quote on FOB or CIF terms as required, supply parts individually by part number, and can ship spares together with a pump order.

Duty-based selectionParts by basic numberDocuments open onlineEnglish technical supportPumps and parts from one source
Contact

Send the duty first, discuss the price after

For a pump, send medium, flow, head, concentration and site conditions. For parts, send the pump model, a nameplate photo or the basic part number. You can also call +86 188 0321 2220.

Send an inquiry

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry