Slurry pump impellers in high-chrome alloy, rubber and polyurethane, identified by pump model, basic part number 147 or dimensions taken from the worn part.
Most impeller failures are material failures rather than dimensional ones: rubber torn by coarse solids, or standard metal perforated by fine corrosive slurry. Describing the medium accurately is worth more than comparing unit prices.

Structure decides passage capability; material decides service life.
| Type | Characteristics and use |
|---|---|
| Closed impeller | Shrouded passages, higher efficiency, for fine to medium particles and energy-saving duty. |
| Semi-open impeller | Wider passage, better solids handling, for coarse or blocking particles. |
| High-chrome impeller | A05 / Cr26 type alloy for coarse abrasive solids. |
| Rubber impeller | Rubber on a steel core for fine particles and mild corrosion; lighter and quieter. |
| Material | Duty | Watch point |
|---|---|---|
| High-chrome alloy | Coarse, highly abrasive, continuous | Hardness and heat treatment state; untempered parts wear fast |
| Rubber | Fine, mild acid or alkali, moderate temperature | Cut by sharp coarse solids; bonding quality matters |
| Polyurethane | Fine particles, wear with some elasticity | Hydrolysis resistance must be checked for the medium |
| Stainless / duplex | Chlorides and aggressive corrosion | Lower abrasion resistance; assess wear and corrosion together |
Four checks before a replacement impeller is quoted.
We can assess it with the worn part or full dimensions (OD, inlet diameter, hub bore, thread or keyway) plus the duty, so that material is decided at the same time.
It depends on the duty. In fine, mildly corrosive slurry rubber often lasts longer; with coarse angular solids metal is clearly better. There is no universal ratio.
Alloy grade and heat treatment, casting quality, machining accuracy and balancing. Two parts sold as "high chrome" can differ greatly in life.
Front and frame plate liners, volute liner, shaft sleeve and seal. A release ring and lock nut are worth keeping in stock.
For a pump, send medium, flow, head, concentration and site conditions. For parts, send the pump model, frame code and basic part number, or a photo of the worn part. We normally confirm the item and price within one business day.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.