Rubber slurry pump parts including rubber impellers, rubber volute liners, rubber cover plate liners and rubber-lined casings, supplied by basic part number.
Rubber is not a cheap substitute for metal. In fine-particle, mildly corrosive duty it is often the lowest cost per operating hour; with coarse sharp solids it fails within days. Particle size, shape, pH and temperature decide.

Rubber resists fine-particle erosion well, and cutting and heat badly.
| Compound / form | Suitable duty | Limit |
|---|---|---|
| Natural rubber lining | Fine particles, mild alkali, ambient temperature | Not oil or strong acid resistant; cut by sharp solids |
| Nitrile rubber | Oily media, higher wear demand | Moderate weather resistance |
| Neoprene | Mild acid or alkali, outdoor and warmer duty | Limited low-temperature flexibility |
| Polyurethane | Fine particles, wear with elasticity | Not hot media; hydrolysis in some slurries |
| Rubber impeller / liner / cover liner | Fine (about 10 mm and below), rounded particles | Coarse or sharp solids, temperature above the compound limit |
| Test | Favours rubber | Favours metal |
|---|---|---|
| Particle size | Fine, about 10 mm and below | Coarse or gravel |
| Particle shape | Rounded, milled particles | Sharp, angular, flaky |
| pH | Neutral to mildly acid or alkaline | Strong acid or alkali |
| Temperature | Within the compound limit | Above the compound limit |
Generally no. Sharp coarse particles cut the lining and the split propagates. High-chrome alloy is the correct choice for those duties.
In fine-particle, mildly corrosive slurry they usually do, with lower noise and vibration. In coarse or hot duty metal is clearly better.
Usually poor core preparation or adhesive failure, allowing slurry to migrate behind the rubber. A blistered lining should be replaced before pieces block the pipeline.
Yes. Each compound has a continuous service temperature; above it the rubber hardens, ages and loses elasticity. Confirm the limit for the compound offered.
For a pump, send medium, flow, head, concentration and site conditions. For parts, send the pump model, frame code and basic part number, or a photo of the worn part. We normally confirm the item and price within one business day.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.