Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Slurry pumps/ZGB Slurry Pump
SLURRY PUMP SERIES

ZGB Slurry PumpAsh handling · multi-stage

The ZGB was developed for ash and slag duty: double casing with separately replaceable liners, discharge indexable through eight positions at 45 degrees, and a trailing P for 3-4 stage series operation. The range runs from 65ZGB to 300ZGB, about 50-1800 m3/h.

Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

ZGB series slurry pump
ZGB Series Slurry Pump
CONSTRUCTION

How this series is built

Horizontal, single-stage single-suction, overhung double-casing heavy duty slurry pump. The ZGB series is a heavy duty, high-head pump developed for ash and slag handling. Its pump end, shaft seal and drive end can be serviced separately; it supports series staging and suits continuous abrasive duties such as power plant ash removal and long-distance tailings transport.

MODELS & DESIGNATION

Reading the designation, models on file

For example 200ZGB(P): 200 is the discharge bore (mm), Z stands for slurry pump, G for high head, B for the series code, and a trailing P denotes multi-stage series operation (3-4 stages).

PERFORMANCE

Flow, head and speed coverage

Typical coverage: discharge bores about 65-300 mm, flow about 50-1800 m3/h and head about 50-94 m.

No public chart is on file; pricing and outline dimensions are available per model.
APPLICATIONS

Typical duties

The industry pages behind these duties set out recommended series, wear parts and field checks.

MATERIALS & SEALING

Wetted materials and shaft sealing

Material follows the medium; sealing follows suction pressure and whether dilution is allowed.

SELECTION NOTES

Three checks before choosing this series

WEAR PARTS

Wear parts and basic part numbers

Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

FROM THE MANUAL

Requirements stated in the manual

Excerpts that apply to this series; read the full text on the online reading page.

FAQ

ZGB Slurry Pump: common questions

ZGB or AH?

Choose ZGB for ash and slag, staged duty and separately replaceable liners; choose AH for mineral slurry across a wide bore range. Both offer high-chrome wetted parts.

What does the trailing P mean?

P marks a multi-stage series build, commonly 3-4 stages. Stage count changes casing pressure and seal water requirements, so it must be stated on the order.

What concentration can a ZGB handle?

It is confirmed from ash-to-water ratio and particle shape, not a single percentage. With coarse slag, check maximum particle size against impeller passage width.

NEXT STEP

Send the duty and we confirm model and material

Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.

Request a quotation

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry