A froth pump does not handle ordinary slurry but froth carrying a large air fraction. The AF uses an enlarged inlet chamber and a purpose-designed impeller so froth breaks and de-aerates before the impeller, avoiding the flow collapse a standard pump suffers from cavitation in flotation circuits.
Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

Horizontal froth slurry pump. The AF froth pump handles aerated, foam-prone flotation slurry. An enlarged suction arrangement and foam-inducing/de-aerating design reduce cavitation and loss of prime, typically in flotation circuits and chemical froth duties.
AF is the froth pump series code; individual sizes are identified by bore and frame designations in the model code.
Published specifications are grouped by bore and flow class; exact figures follow written confirmation.
The industry pages behind these duties set out recommended series, wear parts and field checks.
Material follows the medium; sealing follows suction pressure and whether dilution is allowed.
Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

Mainly high-chrome wear alloy (A05 / Cr26 / Cr27); rubber or p…

High-chrome wear alloy, wear-resistant rubber or polyurethane:…

High-chrome wear alloy, rubber lining or wear/corrosion-resist…

Wear-resistant alloy, stainless or 3Cr13-type martensitic stee…
Excerpts that apply to this series; read the full text on the online reading page.
The suction end. A froth pump has a larger inlet chamber and wider impeller eye so gas can separate inside the pump; a standard pump has no such volume and cavitates.
No public model chart is on file; configurations are confirmed per project. Provide cell size, froth rate, solids content and head, and we will propose a build.
Not advised. Its hydraulics are built around air-laden media and efficiency suffers on plain slurry. Select separate pumps for the two duties.
Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.