Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Slurry pumps/Froth Pump (AF Series)
SLURRY PUMP SERIES

Froth Pump (AF Series)Flotation froth · large inlet · anti-cavitation

A froth pump does not handle ordinary slurry but froth carrying a large air fraction. The AF uses an enlarged inlet chamber and a purpose-designed impeller so froth breaks and de-aerates before the impeller, avoiding the flow collapse a standard pump suffers from cavitation in flotation circuits.

Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

AF series froth pump
AF Series Froth Pump
CONSTRUCTION

How this series is built

Horizontal froth slurry pump. The AF froth pump handles aerated, foam-prone flotation slurry. An enlarged suction arrangement and foam-inducing/de-aerating design reduce cavitation and loss of prime, typically in flotation circuits and chemical froth duties.

MODELS & DESIGNATION

Reading the designation, models on file

AF is the froth pump series code; individual sizes are identified by bore and frame designations in the model code.

No public model chart is on file for this series; models and ratings follow confirmed documentation.
PERFORMANCE

Flow, head and speed coverage

Published specifications are grouped by bore and flow class; exact figures follow written confirmation.

No public chart is on file; pricing and outline dimensions are available per model.
APPLICATIONS

Typical duties

The industry pages behind these duties set out recommended series, wear parts and field checks.

MATERIALS & SEALING

Wetted materials and shaft sealing

Material follows the medium; sealing follows suction pressure and whether dilution is allowed.

SELECTION NOTES

Three checks before choosing this series

WEAR PARTS

Wear parts and basic part numbers

Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

FROM THE MANUAL

Requirements stated in the manual

Excerpts that apply to this series; read the full text on the online reading page.

FAQ

Froth Pump (AF Series): common questions

What is the biggest difference from a standard slurry pump?

The suction end. A froth pump has a larger inlet chamber and wider impeller eye so gas can separate inside the pump; a standard pump has no such volume and cavitates.

Which AF models are available?

No public model chart is on file; configurations are confirmed per project. Provide cell size, froth rate, solids content and head, and we will propose a build.

Can a froth pump double as a standard slurry pump?

Not advised. Its hydraulics are built around air-laden media and efficiency suffers on plain slurry. Select separate pumps for the two duties.

NEXT STEP

Send the duty and we confirm model and material

Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.

Request a quotation

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry