The ZJQ integrates motor and pump into one unit that runs below the surface, with no pump house, foundation or priming. It suits dredging, sand suction, settling tanks and emergency dewatering. Five models are listed here, from 50ZJQ25-15 to 200ZJQ300-25.
Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

Dry-motor, bottom-pump submersible slurry pump. The ZJQ submersible slurry pump integrates pump and motor on one shaft and works fully immersed. A stirring impeller below the main impeller agitates settled sludge into suspension, suiting river dredging, sand extraction and mobile slurry removal.
A common form is 150ZJQ180-22: 150 is the discharge bore (mm), ZJQ the submersible series, and the following figures usually denote rated flow (m3/h) and rated head (m) or motor power (kW). Order varies between manufacturers.
Commonly published bores are about 50-250 mm; flow and head follow the rated figures in the model code.
The industry pages behind these duties set out recommended series, wear parts and field checks.
Material follows the medium; sealing follows suction pressure and whether dilution is allowed.
Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

Mainly high-chrome wear alloy (A05 / Cr26 / Cr27); rubber or p…

High-chrome wear alloy, wear-resistant rubber or polyurethane:…

Faces are commonly silicon carbide or tungsten carbide; metal …

Quality alloy steel or quenched-and-tempered carbon steel, wit…

Heavy rolling bearings (cylindrical roller plus thrust/angular…
Excerpts that apply to this series; read the full text on the online reading page.
ZJQ is fully submersible and easy to move, good for temporary or mobile dredging; ZJL keeps the motor above the surface, better for fixed sumps, continuous duty and warmer media.
Use the maximum passing size in each model chart. For coarse solids and gravel, move to a G gravel pump or a submersible with an agitator to avoid repeated blockage.
50 is the discharge bore in mm, ZJQ the submersible series, 25 the design flow in m3/h and 15 the design head in m. The actual operating point follows the system curve.
Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.