Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Slurry pumps/ZJQ Submersible Slurry Pump
SLURRY PUMP SERIES

ZJQ Submersible Slurry PumpFully submersible · direct coupled · no foundation

The ZJQ integrates motor and pump into one unit that runs below the surface, with no pump house, foundation or priming. It suits dredging, sand suction, settling tanks and emergency dewatering. Five models are listed here, from 50ZJQ25-15 to 200ZJQ300-25.

Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

ZJQ series submersible slurry pump
ZJQ Submersible Slurry Pump
CONSTRUCTION

How this series is built

Dry-motor, bottom-pump submersible slurry pump. The ZJQ submersible slurry pump integrates pump and motor on one shaft and works fully immersed. A stirring impeller below the main impeller agitates settled sludge into suspension, suiting river dredging, sand extraction and mobile slurry removal.

MODELS & DESIGNATION

Reading the designation, models on file

A common form is 150ZJQ180-22: 150 is the discharge bore (mm), ZJQ the submersible series, and the following figures usually denote rated flow (m3/h) and rated head (m) or motor power (kW). Order varies between manufacturers.

PERFORMANCE

Flow, head and speed coverage

Commonly published bores are about 50-250 mm; flow and head follow the rated figures in the model code.

No public chart is on file; pricing and outline dimensions are available per model.
APPLICATIONS

Typical duties

The industry pages behind these duties set out recommended series, wear parts and field checks.

MATERIALS & SEALING

Wetted materials and shaft sealing

Material follows the medium; sealing follows suction pressure and whether dilution is allowed.

SELECTION NOTES

Three checks before choosing this series

WEAR PARTS

Wear parts and basic part numbers

Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

FROM THE MANUAL

Requirements stated in the manual

Excerpts that apply to this series; read the full text on the online reading page.

FAQ

ZJQ Submersible Slurry Pump: common questions

ZJQ or ZJL?

ZJQ is fully submersible and easy to move, good for temporary or mobile dredging; ZJL keeps the motor above the surface, better for fixed sumps, continuous duty and warmer media.

What particle size can a submersible slurry pump pass?

Use the maximum passing size in each model chart. For coarse solids and gravel, move to a G gravel pump or a submersible with an agitator to avoid repeated blockage.

What does 50ZJQ25-15 mean?

50 is the discharge bore in mm, ZJQ the submersible series, 25 the design flow in m3/h and 15 the design head in m. The actual operating point follows the system curve.

NEXT STEP

Send the duty and we confirm model and material

Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.

Request a quotation

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry