Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Slurry pumps/Shield Mud Pump (300LPT-SHG)
SLURRY PUMP SERIES

Shield Mud Pump (300LPT-SHG)Slurry shield · high flow · abrasion resistant

Slurry shield and pipe-jacking systems move excavated spoil out of the tunnel continuously, so the pump must stay stable at high flow with sand and gravel present. The 300LPT-SHG is a large-bore mud pump for that duty; complete-unit and wetted-part photos are on file as a reference for component checks.

Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

300LPT-SHG shield mud pump
300LPT-SHG Shield Mud Pump
CONSTRUCTION

How this series is built

Large shield tunnelling mud circulation pump. The 300LPT-SHG is a large mud circulation pump for slurry shield tunnelling, carrying spoil-laden mud between the face and the separation plant. It is characterised by a large bore and high flow and must be matched to long pipelines and the mud treatment system.

MODELS & DESIGNATION

Reading the designation, models on file

300 relates to the bore (mm), LPT is the series code and SHG the shield mud pump type designation.

PERFORMANCE

Flow, head and speed coverage

Flow, head and motor power are checked against project system data; no product performance is committed on this site.

No public chart is on file; pricing and outline dimensions are available per model.
APPLICATIONS

Typical duties

The industry pages behind these duties set out recommended series, wear parts and field checks.

MATERIALS & SEALING

Wetted materials and shaft sealing

Material follows the medium; sealing follows suction pressure and whether dilution is allowed.

SELECTION NOTES

Three checks before choosing this series

WEAR PARTS

Wear parts and basic part numbers

Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

FROM THE MANUAL

Requirements stated in the manual

Excerpts that apply to this series; read the full text on the online reading page.

FAQ

Shield Mud Pump (300LPT-SHG): common questions

How is a shield mud pump different from a standard slurry pump?

Higher flow, wider passages, a build focused on continuous reliability, and matching to the separation plant. A standard slurry pump in shield duty usually fails by blockage and vibration rather than wear.

Is there a public data sheet for the 300LPT-SHG?

Only unit and wetted-part photos are on file, without a public chart. Provide tunnel diameter, advance rate, slurry flow and head, and the build is confirmed per project.

Which spares should be stocked?

Impeller, volute liner, front and back liners and seal parts are the routine wear items. Continuous boring cannot wait for parts, so stock one wetted-part set ahead of the drive schedule.

NEXT STEP

Send the duty and we confirm model and material

Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.

Request a quotation

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry