The value of a rubber slurry pump is not the price. It is wear life in fine-particle corrosive duty and the maintenance burden: the same casing, a lining that weighs a fraction of the metal part and needs no lifting gear to change.
AHR, LR and MR correspond to the AH, L and M metal series. Casing, cover plate, frame and drive are shared; the wetted parts are replaceable rubber. Published performance data for the horizontal AHR range and the vertical SPR range follows, together with the limits of rubber as a material.

AHR, LR and MR use the same casing, frame and drive as AH, L and M. What differs is that the wetted parts are replaceable rubber.
Figures below are from the published performance chart. Supply follows the test certificate and written confirmation.
| Model | Power kW | Q m³/h | H m | n r/min | Max. eff. % | NPSH m | Impeller mm | Weight kg |
|---|---|---|---|---|---|---|---|---|
| 1.5/1B-AHR | 2.2–15 | 10.8–25 | 7–52 | 1400–3400 | 35 | 2–4 | 159 | 77 |
| 2/1.5B-AHR | 2.2–15 | 25.4–54 | 5.5–41 | 1000–2600 | 50 | 2.5–5.1 | 184 | 104 |
| 3/2C-AHR | 3–30 | 36–75.6 | 13–39 | 1300–2100 | 50 | 2–4 | 229 | 154 |
| 4/3C-AHR | 3–30 | 50–130 | 5–35 | 800–1800 | 59 | 3–5 | 245 | 236 |
| 4/3D-AHR | 7.5–60 | 50–150 | 5–35 | 800–1800 | 59 | 3–5 | 245 | 290 |
| 6/4D-AHR | 11–60 | 144–313 | 7–45 | 800–1350 | 65 | 3–5 | 365 | 454 |
| 6/4E-AHR | 15–120 | 144–313 | 12–45 | 800–1350 | 65 | 3–5 | 365 | 635 |
| 8/6E-AHR | 15–120 | 324–713 | 7–49 | 400–1000 | 65 | 5–10 | 560 | 982 |
| 8/6R-AHR | 22–300 | 324–713 | 7–49 | 400–1000 | 65 | 5–10 | 560 | 1150 |
| 10/8ST-AHR | 45–560 | 540–1188 | 12–50 | 400–750 | 75 | 4–12 | 686 | 1202 |
| 12/10ST-AHR | 55–560 | 720–1620 | 7–45 | 300–650 | 80 | 2.5–7.5 | 762 | 3357 |
| 14/12ST-AHR | 55–560 | 1156–2520 | 13–45 | 300–500 | 79 | 3–8 | 965 | 4672 |
| 16/14TU-AHR | 75–1200 | 1379–3060 | 11–63 | 250–550 | 79 | 4–10 | 1067 | 9680 |
The vertical build sits in a sump or pit and needs no shaft seal.
| Model | Power kW | Q m³/h | H m | n r/min | Max. eff. % | Impeller mm | Max. particle mm | Weight kg |
|---|---|---|---|---|---|---|---|---|
| 40PV-SPR | 1.1–15 | 7.2–29 | 4–28.5 | 1000–2200 | 40 | 188 | 12 | 285 |
| 65QV-SPR | 3–30 | 18–113 | 5–31.5 | 700–1500 | 60 | 280 | 15 | 432 |
| 100RV-SPR | 5.5–75 | 40–289 | 5–36 | 500–1200 | 62 | 370 | 32 | 867 |
| 150SV-SPR | 11–110 | 108–576 | 8.5–40 | 500–1000 | 52 | 450 | 45 | 1180 |
| 200SV-SPR | 15–110 | 180–890 | 6.5–37 | 400–850 | 64 | 520 | 65 | 2800 |
| 250TV-SPR | 18.5–200 | 261–1089 | 7–33.5 | 400–750 | 60 | 575 | 65 | 3700 |
| 300TV-SPR | 22–200 | 288–1267 | 6–33 | 350–700 | 50 | 610 | 65 | 3940 |
Rubber is not a cheap substitute for metal; it has hard limits.
Yes on the same model: casing, cover plate, frame and drive are shared, and the wetted parts come in metal or rubber. Pipework and foundation stay as they are.
Same shell and drive. AHR uses a rubber impeller, sheaths and liners; AH uses high-chrome parts. The choice depends on particle size and corrosion, not on price.
The vertical SPR range lists a maximum particle size of 12–65 mm depending on model. Passing is not the same as surviving: sharp coarse particles tear the lining, and metal is the correct choice there.
Yes. Impeller, front sheath, rear sheath and liners each carry their own part number and can be replaced singly. Replacing a set keeps mating faces and clearances consistent.
We need the slurry, the particle size and shape, weight concentration, pH, chloride content, temperature, and the pump model or a photo of the worn part. With those we can confirm the grade and the part number in one reply.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.