The HH series thickens the wear sections and strengthens the frame of the heavy duty pump to reach higher head in a single stage. The charts on file for 1.5/1C-HH and 3/2D-HH cover 25-92 m per stage, for low-density high-head duty or dense but only mildly abrasive slurry.
Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

Horizontal, double-casing, high-head heavy duty slurry pump. The HH series builds on the heavy duty slurry pump with thicker wear sections and heavier frames for higher single-stage head. It suits low-concentration/high-head or high-concentration/low-abrasion high-head duties, long-distance lines and series operation.
For example 3/2D-HH: 3 is the suction bore (inch), 2 the discharge bore (inch), D the frame code and HH the high-head series.
Typical coverage: discharge bores about 25-150 mm and single-stage head up to roughly 90-118 m.
| Model | Max. power kW | Q m³/h | H m | n r/min | Max. eff. % |
|---|---|---|---|---|---|
| 1.5/1B-AH | 15 | 12.6-28.8 | 6-68 | 1200-3800 | 40 |
| 2/1.5B-AH | 15 | 32.4-72 | 6-58 | 1200-3200 | 45 |
| 3/2C-AH | 30 | 39.6-86.4 | 12-64 | 1300-2700 | 55 |
| 4/3C-AH | 30 | 86.4-198 | 9-52 | 1000-2200 | 71 |
| 4/3D-AH | 60 | 86.4-198 | 9-52 | 1000-2200 | 71 |
| 6/4D-AH | 60 | 162-360 | 12-56 | 800-1550 | 65 |
| 6/4E-AH | 120 | 162-360 | 12-56 | 800-1550 | 65 |
| 8/6E-AH | 120 | 360-828 | 10-61 | 500-1140 | 72 |
| 8/6R-AH | 300 | 360-828 | 10-61 | 500-1140 | 72 |
| 10/8ST-AH | 560 | 612-1368 | 11-61 | 400-850 | 71 |
| 12/10ST-AH | 560 | 936-1980 | 7-68 | 300-800 | 82 |
| 14/12ST-AH | 560 | 1260-2772 | 13-63 | 300-600 | 77 |
The industry pages behind these duties set out recommended series, wear parts and field checks.
Material follows the medium; sealing follows suction pressure and whether dilution is allowed.
Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

Mainly high-chrome wear alloy (A05 / Cr26 / Cr27); rubber or p…

High-chrome wear alloy, wear-resistant rubber or polyurethane:…

High-chrome wear alloy, rubber lining or wear/corrosion-resist…

Wear-resistant alloy, stainless or 3Cr13-type martensitic stee…

Heavy rolling bearings (cylindrical roller plus thrust/angular…
Excerpts that apply to this series; read the full text on the online reading page.
Both are heavy duty double-casing pumps. HH has thicker wear sections, a heavier frame and more head per stage; AH covers a wider range of bores and flows. Compare single-stage head first, then bore size.
The limit comes from allowable working pressure and seal water conditions, not a fixed number. From the second stage onward, casing, cover and seal must be reviewed for the pressure actually seen.
It can hit the duty on paper but rarely pays. Higher speed accelerates wear, raises cavitation risk and shortens life in solids-laden service by more than the purchase saving.
Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.