Too few spares stop the line; too many tie up cash. Tier them A/B/C, calculate annual consumption from measured life and manage them on one numbered list.
Figures here come from the charts, the basic part number index and the manuals on file. Anything without a public source is marked as per supplied documents rather than inferred.

Tier spares by whether failure stops the line, not by price. For one pump, roughly 70% of the spares budget should sit in tier A.
| Tier | Scope | Recommended stock | Why |
|---|---|---|---|
| Tier A | Impeller, liners, sleeve, packing | One set plus 20% buffer | Fast wear, high downtime cost, no substitute |
| Tier B | Cover, casing, expeller, relief cover, bearing assembly | Half to one set per unit group | Longer life, slow recovery when missing |
| Tier C | Shaft, frame, fasteners, gaskets, O-rings | By common size | Generic, locally available |
Based on AH and ZJ double-casing pumps, listed by basic number. Other series add or drop items by construction.
| Location | Part | Basic no. | Note |
|---|---|---|---|
| Wetted | Impeller | 147 | Change with liners |
| Wetted | Frame plate liner | 041 | Drive side |
| Wetted | Throat bush | 083 | Suction side, clearance datum |
| Wetted | Volute liner | 110 | Fits the casing |
| Wetted | Cover / casing | 013 / 032 | Long life, share across units |
| Sealing | Shaft sleeve | 075 | Replace with packing |
| Sealing | Stuffing box / packing | 078 / 111 | Size to sleeve clearance |
| Sealing | Expeller / relief cover | 028 / 029 | Check on expeller seals |
| Drive | Bearing assembly | 005 | Swapping the cartridge is faster |
| Drive | Shaft | 073 | For bending or journal wear |
| Sealing | Gaskets / O-rings | 122 / 064 | Replace at every strip-down |
Annual consumption equals units times parts per unit times annual hours divided by part life hours. Safety stock is consumption during lead time plus 20%.
Build the table on these fields so purchasing, stores and maintenance work from one set of numbers.
Start with one wetted-part set, one seal set and the consumable gaskets, then adjust on measured life after a full service cycle.
Normally impeller, liners and volute together, because clearance and wear interact. Changing one item alone lets the old parts wear the new one out quickly.
Rubber ages: keep it dark, oil-free and at room temperature with dates recorded. Protect metal from rust and rotate shafts and bearing assemblies periodically.
Yes. A frame agreement against annual consumption with staged deliveries fixes prices and frees working capital.
For pumps, send medium, flow, head, density and installation. For parts, send model, frame code and basic number. We reply within one business day.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.