One basic number can be quoted at twice another price. The gap is not greed but material grade, wall thickness, inspection and batch size. The breakdown below covers the inquiry checklist and a total-cost method.
Figures here come from the charts, the basic part number index and the manuals on file. Anything without a public source is marked as per supplied documents rather than inferred.

Slurry pump parts are not catalogue items. The basic number says which part it is; material, wall thickness, inspection, batch size and tooling decide what it costs.
Not every low price is bad, but knowing where it came from tells you whether the risk is acceptable.
| Practice | What it looks like | What it does |
|---|---|---|
| Lower alloy content or remelt scrap | Same look, same weight | Hardness and wear life drop, often by half |
| Thinner sections | Lighter, cheaper | Reaches the wear limit sooner, higher perforation risk |
| No balancing or inspection | Faster delivery | Vibration and short bearing life; hidden defects surface on site |
| Copied from a worn part | It fits | Clearance and profile偏差 shift flow and head |
Miss one item and the supplier quotes the most common build, which means another round of questions later.
A simple example: a part costing 50% more but lasting twice as long cuts annual cost by a quarter.
| Item | Low-price part | Long-life part |
|---|---|---|
| Unit price | 3,000 | 4,500 |
| Service life (months) | 3 | 6 |
| Parts per year | 4 | 2 |
| Annual part cost | 12,000 | 9,000 |
| Stops per year | 4 | 2 |
| Cost per stop | 按现场计 | Same |
A low price always corresponds to a trade-off in material, section thickness or inspection. Knowing the trade-off is what makes it acceptable; comparing numbers alone moves the risk to site.
Impellers, liners, sleeves and similar wear parts are usually held as blanks or finished stock, confirmed against model and material. Non-standard parts and special grades need production time.
Yes, given a drawing or a measurable sample plus critical fits and material. Remember a worn sample is not a dimension reference for a new part.
No. Small rubber parts usually are, but large lined casings with steel inserts can approach metal prices. Choose on medium and life, not unit price.
Normally within the month, given alloy and exchange rate movement. Frame agreements can fix an adjustment formula.
For pumps, send medium, flow, head, density and installation. For parts, send model, frame code and basic number. We reply within one business day.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.