Coal preparation is where most coal slurry pumps work: heavy medium suspension, coal slurry, rejects and middlings. Density is high, particles are angular, and the pump runs continuously at high head, so wear is dominated by cutting and erosion.
Duty characteristics, wear patterns, selection notes and common questions for this industry, with the matching series and wear parts.

Common combinations; the final choice follows a duty calculation.
| Duty condition | Selection and material |
|---|---|
| Heavy medium suspension | High-chrome wetted parts; account for density in shaft power |
| Coal slurry | Metal or rubber by particle size and cost per hour |
| Rejects and middlings | Thick high-chrome impeller and volute liner |
| High head transport | HH series or series operation; check the system curve |
Model pages list construction, code explanation and chart extracts; part pages list basic number and material.
Heavy medium is dense and the cyclone and piping add resistance, so the actual duty point differs from the catalogue curve. Margin prevents running at low flow, which raises wear and vibration.
Yes for fine slurry without large rejects. With coarse angular solids, metal parts are the safer choice.
Usually not. In a double-casing pump only the liners are replaced; the casing is changed when it is penetrated, cracked or distorted.
Medium, concentration, particle size, flow and head are enough to propose a pump, a material and a spare-parts list. For a replacement, a nameplate photo confirms the part numbers.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.